Canopy swing bed is a quick and easy way to add a romantic element to a bed. A canopy fastens above the bed and allows the fabric to drape over the bed in any way. Some screen ceilings use bed frames and curtains, while others prefer a mosquito net ring or a crown centered over the head in the bed. Using thin striped fabrics keeps a canopy light and airy, with the addition of a desirable sense of softness and intimacy. Making a simple ring canopy is not difficult.
Instructions
26 Photos Gallery of: Canopy Swing Bed Ideas
Screw a large screw eye into the roof or stud above the center of the gable at least 12 inches away from the wall. This should be about the middle of the pillows at the tip of the bed. Cut four pieces of canopy swing bed that is 12 inches long with the help of a bit. Assemble the loose four ends of an S hook. Hang the wrap outside so you can easily spray all sides. Allow the paint to dry for an hour. Hang S hook into the screw eye.
Measure around the circumference of the crown. Measure from the wreath to the floor on the sides of the bed and add 1 inch. Cut four thin netting-type fabrics to this length. The width of canopy swing bed for each panel should be at least the amount of circumference measurements. Sew a double half-inch seam around all sides of each fabric panel. Place the fabric in the sewing machine face down at the top edge to sew over the width of the panel. Set the sewing machine to the widest zigzag setting. Place the cording so that the sewing sews over the cord without touching the cord.
These are reader choosen ideasswing king size bed, what is a king swing bed, canopy swing bed
