A puffy canopy can add romance to a full size four-poster bed. With the addition of the canopy one side at a time, the seam is less complicated and the room will be left in the corners of the bonds that connect the canopy to the posters. This project stitches can be made with a needle and thread or with a sewing machine. Start with measure the distance between the columns of the bed on the full size canopy bed. These to determine the length and width of the canopy.
Cut two pieces of fabric to length plus 2 inches and half the width of the bed plus 2 1/4 inches. A width of the fabric 45 inches long will not be wide enough for the full size canopy bed. Sew the strips together of a stitch 1/4 inch. With the right side of the fabric against each other. Home all the edges of the crown by turning the edges under half-inch twice and hand. Cut two strips of fabric punch 6 inches wide to twice the length of the canopy. And also two 6-inch wide strips to double the width of the canopy.
25 Photos Gallery of: Make A Ruffle Full Size Canopy Bed
Home each strip turn a long edge, and both short sides under 1/2-inch times. Hand sews a long quarter-inch basting point with a border along a strip. Pull the thread to glue to the length of hair less than 1 inch. Repeat with all the striped rifles. Pin and sew strips, right side, and the edges of the canopy leave an opening half-inch from each corner. Cut the silk ribbon in four equal parts. Fold the ribbon in half and section them handsaw the corners of the full size canopy bed for attachment to the posters read.